Sencor SCP 4501BK
UltraFlat two-burner induction stove
Especially thin design
2 cooking zones
Fast and efficient cooking
Touch control, slider for easy temperature and power adjustment by moving your finger
Overheating protection
Easy maintenance
Power consumption: 3400 W
Temperature: 60 - 240 ° C
UltraFlat two-burner induction stove
-Simple touch panel operation with slider for temperature and power control
-Thin compact design, the height of the stove is only 4.3 cm
-Easy maintenance of ceramic induction stove
-Saves time and electricity due to the high efficiency of induction cooking
The glass ceramic induction stove is cool to the touch because the heat is generated by induction directly in the pan (be careful, the stove can be partially heated from the pot). Induction cooking saves time (60%) and electricity (50%). It has high efficiency (up to 90%) and minimal heat loss.
You control the stove and individual functions with touch buttons. You set the temperature and power simply by moving your finger left and right, the so-called slider. A clear large LCD display with red lighting informs about temperature and performance.
The continuous surface of the glass ceramic covers the entire top of the stove. Therefore, it is easy to keep the device clean. Since the heat required for cooking is generated in the pot and the stove is not directly heated (only residual heat from the pot), what accidentally spills from the pot does not burn onto the stove surface.
Microprocessor operation control.
Instant power transfer without prolonged preheating.
Reduced noise by optimizing the internal layout.
Suitable for cookware with a diameter of 12 to 26 cm.
Automatic detection of induction cooking cookware (with magnetic bottom).
Ability to select temperature/power settings.
Temperature control from 60 ° C to 240 ° C.
10 pre-set heating levels ranging from 200 to 2000 W and 200 - 1400 W.
Sleep delay up to 180 minutes.
On/off button to turn on or switch to standby mode.
Anti-slip feet.
High safety level:
-Automatic detection of cooking pots and automatic shut-off. The stove turns off if the pan is removed from the stove or unsuitable cookware for induction cooking is used. You can easily check the suitability of the cookware by placing a magnet on the bottom of the pot.
-Heat fuse against overheating of the stove and the inside of the stove with an audible signal. First, a warning signal sounds, then the stove automatically turns off.
-Residual heat indication. If the stove surface temperature exceeds 80 ° C (heat generated by the heated bottom of the pot), the letter "H" will appear on the display as a warning. The warning will disappear as soon as the surface temperature drops below 80 ° C.
-Control panel lock. It is used to protect against accidental activation and setting changes, for example, in the case of small children. You can also lock the stove when it is turned off (if the display shows "OFF"). To unlock the stove functions, the button must be pressed for 3 seconds.
-Automatic shut-off of the stove after 2 hours of inactivity.
Technical specifications:
Power consumption 3400 W
Dimensions (width × depth × height): 560 × 360 × 43 mm
Weight: 4.56 kg
Voltage and frequency: 220V - 240V ~ 50 / 60Hz
Timer: delay up to 180 minutes
Left burner: 10 power levels from 200 to 2000 W
Right burner: 10 power levels from 200 to 1400 W
Temperature setting from 60 to 240 ° C
Control devices: touch sensor controls, slider for power and temperature settings
Safety: control panel lock to protect against accidental activation and setting changes
Thermal fuse against overheating
Product description is auto-translated.
